Traffic Management Compliance: Lessons From a €1.2m Ireland Fine
Traffic management compliance failures led to a €1.2m fine for an Irish roadworks contractor. See…
A multi-national food company has been fined more than £300,000 after one of its workers lost four fingers on his right hand while unblocking a machine at a site in Glasgow.
Kerry Ingredients (UK) Limited received the fine following an incident at its factory in Hillington on 4 August 2021. The 39-year-old man was working on a mixer at the site, where dry seasoning blends and mixes are manufactured for the food industry.
During the mixing process the machine began to develop a blockage, which the worker attempted to clear by inserting his right hand into the machine. However, as he did so, it came into contact with the rotating blades which resulted in the amputation of four of his fingers. Since the incident, the man has had to re-learn how to do everything with his left hand.
An investigation by the Health and Safety Executive (HSE) established that there were no fixed guards preventing access to the blades from the underside. It also found there were not any interlocked guards which would stop the rotating parts if any component on the underside of the mixer were to be removed.
Kerry Ingredients (UK) Limited of Bradley Road, Bristol pleaded guilty on 26 July 2024 to a contravention of The Provision and Use of Work Equipment Regulations 1988, Regulations 11(1) and (2) and the Health and Safety at Work etc. Act
1974, Section 33(1)(c). At a further hearing on 8 August 2024, the company was fined £360,000.
HSE principal inspector Hazel Dobb said: “This incident could so easily have been avoided by simply carrying out correct control measures and safe working practices.
“Companies should be aware that HSE will not hesitate to take appropriate enforcement action against those that fall below the required standards.”
Source: Health and Safety Executive
Traffic management compliance failures led to a €1.2m fine for an Irish roadworks contractor. See…
Women in construction safety take the spotlight as an Irish health and safety officer is…
A fatal Saskatoon incident puts mobile plant safety back in focus. See how digital risk…
Work at height compliance gaps led to a £20,000 fine after a UK roof fall.…
Two UK port forklift fines expose the same workplace transport compliance gap. See how FlexManager…
Chemical safety compliance failures led to a $794,000 OSHA fine and two deaths at a…
Quality assurance compliance gaps let faulty imported steel collapse part of an Australian public building.…
Machinery safety compliance failures cost an Irish manufacturer €400,000 after a fatal design flaw. See…
Demolition safety compliance failed when a UK site skipped its method statement. See how FlexManager’s…
A Melbourne crane collapse exposes gaps in crane safety compliance. See how FlexManager tracks asset…
A $624,000 asbestos fine shows why contractor safety compliance needs verified certifications. See how FlexManager…
A repeat £120,000 fine shows why manual handling compliance needs ongoing tracking. See how FlexManager…
Fill out the form below and one of our FlexPerts will contact you.